Printable View
HI!
I'M NOT VERY GOOD IN EDITING OF POST PROCESSOR, SO I SEARCH A POST PROCESSOR THAT I CAN USE WITH MY HOME MADE PLASMA CUTTER,
THE MACHINE IS NOT FINISH OF BUILDING BUT I WANT TO FIND THE POST PROCESSOR BEFORE MY FIRST RUN...
IN PLASMA CUTTER, EACH TIME YOU START THE TORCH, THE MACHINE SHOULD "DWELL" TO LET THE PLASMA ARC CUT TROUGH THE SHEET, SO IT's POSSIBLE TO POST IT WITHOUT MANUALLY PROGRAM THE DWELL IN THE G-CODE???
Yes, of course it's possible. What code makes it dwell?
THE DWELL CODE IS G04 P (TIME)
BUT I WANT IT TO DWELL EACH TIME IT HAVE A NEGATIVE MOVEMENT ON THE Z AXES
EX:
G00 Z0.25
G01 Z0.03 (POSITION OF THE TORCH FOR CUTTING)
G04 P5 (TIME THE TORCH TAKE TO GET TROUGH THE PLATE)
G01 X.. Y,, (SHAPE OF PART ETC.)
Should be able to do this, I'm thinking of a way to do it, does the dwell time need to change due to the thickness it's going through?
If you post your .pst I'll try and have a go. Pm me if you don't want it public.
I CAN'T INSIRT THE .PST FILE IN THE REPLY... I WANT TO SEND THE "GENERIC FANUC 3X MILL" TO MODIFY IT...
- - - Updated - - -
sorry, the caps lock was "on"
If you compress it into a .zip file it will let you upload...
Attachment 243856here it is!
Ok I will have a look tomorrow.
Have fun BM as he only posted the PST file so what version is it for if it is for a new mastercam X series were is the Machine and condrol def.looks like an X3 post.
Ok done it, how do you want the p value to be controlled.
At the moment I've done it by the z value. Eg if it's z 5. It will be p5. I've put in a factoring value so if it's factored at 0.5 _ z at 5 would give p at 2.5
I'm guessing z values are always positive and you are cutting through to the bottom of the plate. Z0
Can you confirm?
???
YEAH, THE ZERO SET IN Z VALUE IS RIGHT ON THE TABLE (UNDER THE PLATE)
Ok. So how many seconds does it take to burn thru 1mm
https://drive.google.com/file/d/0B2E...it?usp=sharing
This is a link to the new .PST file with the dwell added.
Misc real 1 is a factoring value. defaults to 1 second per mm.
Hope this is what you required.
https://onedrive.live.com/redir?resi...int=file%2cpst
New link for file.
do you have a new link post bro ?Quote:
Originally Posted by Bm150