G.Weike LC6090 - My experience

Hi there,

This is my first post in this forum.
I use a cnc router (homebuild) for the past few years, and I was thinking of a laser upgrade for a while now. Problem is to find a good / cheap / reliable system.
After a few searches on the Interweb, I found this forum, and after reading billions of posts (well, almost...:D) I have decided to go for a G.Weike laser.

I sent a mail to this company, and Tina, replied back to me with a few specs and good advices on the machine I need for my use (I will cut mainly 3mm plywood, and maybe a few bits of aluminium (rarely, but will be nice to know that I can do it). Contact with Tina was absolutely excellent, very informative, and another thing I found great, is that when I got the list of options that were available, she did not try to over sale, and gave me only what I needed!

So, I went for the LC6090, with 80w laser, and the automatic up/down table.
I have just received the PI, and paiement from the bank is on its way :)

I will keep you updated, as my experience might help someone else who want to take the plounge!

So far : Communication and knowledge/advices from Tina a G.Weike were all spot on! Tina made the entire process of ordering the machine very easy, friendly and always replied to my silly question very quickly. (yeah, I had a few stupid questions! :D )

Now it's up to the shipper here to continue to make this experience still enjoyable, so wait and see!

Stay tuned for more as it comes, and thanks again to Tina!

Fred

You wont be cutting aluminium with that laser..I hope they informed you of that when you asked... ?

Hey Fred,

Congrats! I've had a similar great experience (so far!) with them as well... can't wait to get the actual product in my hands. When are you expecting yours to ship?

Dave

:cheers: :wee:

So glad to see our company and our products have become so popular and so hot in this forum！

Hope our machines bring people more pleasure in using and working! I think our machines will build up your confidence for made-in-china lasers!

Guys who are interested in our machines or have problems when using the lasers no matter made by us or not can write to me: [email protected] or skype: melody.gweike , I'll do my best to help!

Melody

Hi,

@ Rodney : I did a bit of reseaches also, and asked other "main" (or whatever you call the more expensive cnc manufacturers :rolleyes:) and all of them came back to me saying that I can indeed, cut aluminium (well, all I want to be able to cut, are aluminium sheets, 1.5 to 2mm thick max), but this is not my main material, so I am not too worried anyway for that.

@ Dave : Thanks. I have also read your experience so far, and I totally agree with you on all the points you made. So far, my experience is very pleasant, and I deal with people who knows what they are doing! Mine should be shipped sometimes before the Chinese Public holidays, but I am not in any particular rush. My aim is to be fully operational sometimes in March, but I am really forward to receive the machine and do my first cuts! :cheers:

@Melody : Please pass my thanks to Tina, and so far, my experience with your company was A1! I plan to buy a bigger one next year, and one thing is sure, that will come from your company!

I don't know who told you you will be able to cut aluminum with 80W but I hate to tell you that it's not going to happen at all. I doubt you could even cut aluminum foil with 80W...

The "main" CNC manufacturers you probably asked are selling several thousand watt CO2 lasers. They can cut aluminum, but usually only very thin stuff. Aluminum spreads heat around too fast, makes it very hard to cut with heat.

Hi Fred,
I feel so happy when i first see this thread you post,just like i first time got your email.i believe you already travelled long time on cnczone for your laser cutting machine,so i appreciate your belief and courage.
we can prove that your choice is sensible and correct,today,i send your machine's actual condition,pls check your email when you have time.
in addition,talking with you is a pleasure thing.

As well as an 80 watt budget laser I have two Mitsubishi 3600 watt metal cutting lasers and even those struggle with aluminium of any serious thickness.
Yes you can cut some metals with an 80 watt tube but only up to 0.5mm thick and even then only with special lens's and cooling and possibly exotic assist gasses.

Anybody that tells you it's possible to cut 2mm aluminium with a budget CO2 laser is basically wrong no matter who they are or what they are trying to sell you.

best wishes

Dave

Quote:

---

Originally Posted by Exsecratio

As well as an 80 watt budget laser I have two Mitsubishi 3600 watt metal cutting lasers and even those struggle with aluminium of any serious thickness.
Yes you can cut some metals with an 80 watt tube but only up to 0.5mm thick and even then only with special lens's and cooling and possibly exotic assist gasses.

Anybody that tells you it's possible to cut 2mm aluminium with a budget CO2 laser is basically wrong no matter who they are or what they are trying to sell you.

best wishes

Dave

---

hi dave,first,we are very glad that you are a helpful person and kindhearted,maybe you are not so clear about Fred's requirement,we already talked about the cutting aliuminum from the first email.we are a laser machine manufacture for more than 8years,and have much experience on it,we are not telling laser machine can cut aliuminium sheet,but it really can cut the coated aliuminium.maybe you need to learn about the spray.because it sell in your country

Tina - are you referring to engraving / marking on coated or anodized aluminum, or marking on metals with some of the coating sprays (like Thermark)? Not cutting through the metal itself, but marking on it?

Hiya Tina,

Thanks for the kind words, I think some of what you are saying is lost in translation (although your English is far better than my Chinese for sure).

What may be confusing some people is the difference between surface marking bare aluminium, surface marking using compounds like Cermark / Thermark and marking Anodised aluminium.

As I'm sure you know surface marking of bare aluminium is not possible with a standard laser setup unless specialist lens systems are used and high power tubes.

Marking ONTO aluminium is possible with products like thermark / cermark.

Marking ONTO anodised aluminium is again possible as it is the coating or anodise that is being marked and NOT the substrate metal.

Anodise or aluminium hydroxide looks very much like a honeycomb under magnification and the dye particles are contained in each of the combs giving the colour, the base metal has no colour and is still impervious to low power budget laser systems.

I was a little concerned that the loss in translation may leave people believing that budget lasers will mark direct onto bare aluminium which is something that is not going to happen.

best wishes

Dave

Hi everybody,

After a long absence, I am back!
And with good news, as the machine landed in my garage yesterday afternoon!!
I will open the crate Saturday, and will report on the machine with photos etc etc.

So far anyway, all is looking good, and once again, a top service from Tina!!

Stay tuned for more soon!

Fred - Happy :)

@loopingfred (Fred)

So, do you want to cut aluminium with this laser of yours, or not? Because like the people before me said, it's impossible to cut alluminium with "budget" lasers. Don't get your hopes up.

On the other hand, I'm really looking forward to hear from you about the machine, since I'm too thinking about buying from G.Weike.

[QUOTE=TurkishDelight;1104593]@loopingfred (Fred)

commen laser with Chinease tube can not cut aluminum.

When machine coming GSI 200w tube, can cut thinner aluminium

Hi all,

Ok, I bring back this thread from the dead!
2 years already!
Just to follow up on my Laser machine, if some are interested.
I am still very happy with it, and the machine is performing flawlessly! Not a single issue, rock solid! :)

And of course, I have a question for the Gweike / WKLaser team. :)
I would like to change the tube from 80W to 100W. I believe this is possible in my machine (this was an old discussion!).

Also, as I read back the thread, especially about cutting aluminium, I had a chat with Tina at the time after some of the posts, and she did indeed confirm that it was not possible with 80W, or even 100 :) While some European manufacturer were still saying that I could. I tried, out of curiosity, and I can't. Just to correct the facts on the thread.

Anyway, all in all, after 2 years of good service, very very happy with my choice of machine, and if I had to buy a second one (hopefully!), this will be from the same people.

Fred

Changing the tube from 80w to 100W is easy, just changing tube& powersupply is ok.
Cutting aluminium is impossible with 100w.

Quote:

---

Originally Posted by loopingfred

Hi all,

Ok, I bring back this thread from the dead!
2 years already!
Just to follow up on my Laser machine, if some are interested.
I am still very happy with it, and the machine is performing flawlessly! Not a single issue, rock solid! :)

And of course, I have a question for the Gweike / WKLaser team. :)
I would like to change the tube from 80W to 100W. I believe this is possible in my machine (this was an old discussion!).

Also, as I read back the thread, especially about cutting aluminium, I had a chat with Tina at the time after some of the posts, and she did indeed confirm that it was not possible with 80W, or even 100 :) While some European manufacturer were still saying that I could. I tried, out of curiosity, and I can't. Just to correct the facts on the thread.

Anyway, all in all, after 2 years of good service, very very happy with my choice of machine, and if I had to buy a second one (hopefully!), this will be from the same people.

Fred

---

Hi Melody,

Many thanks for the quick reply.
No worries, I don't want to cut aluminium, this was just for info :)

So, if I want to upgrade to 100w, I also have to change the power supply? Did not thought of that! D'Oh!

Quick question, as a matter of interest, do you supply tubes? As if I have to change mine, I would much prefer to continue to deal with you. very happy with the service and advises I received so far :)

Quote:

---

Originally Posted by loopingfred

Hi all,

Ok, I bring back this thread from the dead!
2 years already!
Just to follow up on my Laser machine, if some are interested.
I am still very happy with it, and the machine is performing flawlessly! Not a single issue, rock solid! :)

And of course, I have a question for the Gweike / WKLaser team. :)
I would like to change the tube from 80W to 100W. I believe this is possible in my machine (this was an old discussion!).

Also, as I read back the thread, especially about cutting aluminium, I had a chat with Tina at the time after some of the posts, and she did indeed confirm that it was not possible with 80W, or even 100 :) While some European manufacturer were still saying that I could. I tried, out of curiosity, and I can't. Just to correct the facts on the thread.

Anyway, all in all, after 2 years of good service, very very happy with my choice of machine, and if I had to buy a second one (hopefully!), this will be from the same people.

Fred

---

Hi Fred,
So glad to hear that you are satisfy with our laser still.now RECI tube upgrade already,their former 80w already upgrade to 90-100w
so just replace laser tube from V2 to Z2 is ok
waitting for your news!

Hi,
I am looking into a G Weike LC1390 laser & want to chat with Weike Laser owners. How do you like your laser now? I’m wondering what options you were offered & had installed? How your post customer service has been & definitely if you’ve called about technical help.
Thanks,
Todd

I recently imported an LC6090 as well. While the build quality is really good for the price, it came with a bunch of issues which have been annoying and costly to figure out and fix. Definitely was not expecting to put so much effort into troubleshooting and being unable to use my laser a weeks after it's been received. My post below:

https://www.cnczone.com/forums/gener...90-issues.html

Hello Todd, have you bought the laser machine? This is Shelly from GWEIKE laser. my email is [email protected] and whatsapp/wechat/Skype/Facebook +86 18615219714.
I am so glad that many friends are interested in GWEIKE products.