CNC Router Parts / Avid CNC Benchtop PRO 2424 Machine Kit + Sensors - $1800

I'm selling a CNC Router Parts / Avid CNC Benchtop PRO 2424 Machine Kit and the associated sensor kit (just the machine kit + sensor kit, other electronics/motors not included). Purchased new in April 2018 and in service since May 2019. Used regularly but no issues at all, maintained carefully according to CNCRP's schedule. Runs great, but I'm switching to a larger machine.

All the details are here: Benchtop PRO 2424 2' x 2' CNC Machine Kit | Avid CNC | CNC Router Parts

Asking $1800 + shipping or pickup in Chicago.

Some photos:

https://www.cnczone.com/forums/attac...d=424688&stc=1
https://www.cnczone.com/forums/attac...d=424690&stc=1
https://www.cnczone.com/forums/attac...d=424692&stc=1

Hey dzsflw, I'm interested in buying your Benchtop PRO kit. I'm having issues sending a PM, but as soon as I get that sorted out I'll message you.

I'm a little confused, are you selling a complete working machine as pictured with motors & controls or a Kit?

Sorry for any confusion, I'm selling the machine Kit and sensor kit only. The motors and controls in the pics are not included and will be removed in a couple of days. I'll update the pictures after the electronectomy.

Quote:

---

Originally Posted by dzsflw

Sorry for any confusion, I'm selling the machine Kit and sensor kit only. The motors and controls in the pics are not included and will be removed in a couple of days. I'll update the pictures after the electronectomy.

---

So the pictures of the completed and running machine are not yours?

So if its just the unbuilt machine kit and the sensor kit why not just post pictures of the boxes? Its not confusing its dishonest.

You have misunderstood. That aluminum and red thing in the picture is specifically the exact physical item that I'm selling. It is assembled and running, and I am using it.

I am only selling the portion that CNC Router Parts refers to as the "Machine Kit", which is all of the mechanical parts (and the thing they refer to as "Pepperl + Fuchs Proximity Limit Switch Kit"). By "kit" I am referring to the product name of the item as invoiced by the manufacturer, not suggesting that it is not assembled. You can see what that "kit" includes at the link I included, which will help to disambiguate any confusing factors in my photographs.

I will not be selling the motors and controls (known on the CNC Router Parts site as "Plug and Play NEMA 23 CNC Control System"), although they are seen in the photo (as I said the machine is in use right now); nor is the router, dust boot, hose, amazon box, trash can, pile of bolts and clamps, scrap plywood, box of screws, or electrical conduit included. My garage is also not included, although the wall can be seen in the photo. I can be flexible about the zip ties, though.

If someone wants to pick it up in Chicago (or somewhere near Chicago), it can still be assembled (minus "Plug and Play NEMA 23 CNC Control System" as described above) if the buyer prefers. If it is shipped, I will work out with the buyer whether it is shipped assembled or not (again, just the "Machine Kit", which might or might not be fully assembled depending on buyer preference). It is designed to be shipped in pieces and I expect that doing so will be drastically cheaper, but if someone wants to save a couple of hours by having it crated and shipped freight, that's fine too.

I hope that helps with any confusion. If you still think that the photos are dishonest somehow, though, I can remove them.

Yes if your not selling a complete working CNC machine, as pictured then remove the pictures. Call it a CNC machine for parts. Remove what your not selling from the photos its very misleading, if not dishonest.

This place is like a perfect historical re-enactment of the 90's internet.

It's entirely preposterous, but OK, I'll remove the pics. I can't see any way to edit or delete a post, though. Is there some way to do that? Some mod need to do it, perhaps? I don't see any "edit post" link under that particular message.

If anyone wants photos of it, just send me a message, or follow the link in the original post to see what it looks like.

Quote:

---

Originally Posted by wmgeorge

Yes if your not selling a complete working CNC machine, as pictured then remove the pictures. Call it a CNC machine for parts. Remove what your not selling from the photos its very misleading, if not dishonest.

---

Also, just to clarify for any other readers besides wmgeorge, it's not "for parts" as that phrase is commonly understood. It is in great condition. One would need to either add the CNCRP electronics package or assemble their own. I'm not sure how I can make it any more clear.

I think the original post and photos make it perfectly clear what is and isn't being offered for sale. It wasn't misleading or confusing to me. Just my 2 cents.....

Sent from my Pixel 3 XL using Tapatalk

Quote:

---

Originally Posted by maxmeaker

I think the original post and photos make it perfectly clear what is and isn't being offered for sale. It wasn't misleading or confusing to me. Just my 2 cents.....

Sent from my Pixel 3 XL using Tapatalk

---

Go for it then.

I also had zero problem understanding what was and was not for sale from the first post. Clear as day.

Quote:

---

Originally Posted by retrosmith

I also had zero problem understanding what was and was not for sale from the first post. Clear as day.

---

Yup, its still for sale.... I wonder why?

Because it's only been listed here for six days maybe?

I bought the 24x36 model of this machine earlier this year and if this had been available then I've bought it instead.

Machine is sold.

Congrats on the sale. :)

I see not much has changed on the zone since I last bothered to log on!

Awesome looking machine, nice design and decent price too, I reckon the buyer will be very happy.