Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Hey Guys,
I'm looking for quotes for 50,100, & 150. Material is 6061 aluminum hex bar stock .750 across the flats
My drawing may complicate things more than it should, so if you have any questions, please ask. Basically it's knock .015 off the outside diameter, put the 2 hash marks - we were using a cutoff tool that was .093 wide, but something close in width will work. drill 2 bores and cross drill the holes.
My only concerns are that the pieces be centered enough so that the hex edges are taken off in (relatively) equal amounts. With the current ones, sometimes the cutter would hit much more on one side making a large "flat" corner and be barely hitting on the other side.
Secondly, The parts will be anodized so surface condition can't have deep dings or deep jaw marks that sand blasting wont take out.
We have several prototypes that we are looking to move into production with soon too, so we'd really like to form a relationship with a good shop who puts out quality product at a fair price.
http://i1361.photobucket.com/albums/...pslikc79rl.jpg
http://i1361.photobucket.com/albums/...ps4zwzap0i.jpg
http://i1361.photobucket.com/albums/...pshlncnyhs.jpg
http://i1361.photobucket.com/albums/...psgsmjhwra.jpg
http://i1361.photobucket.com/albums/...pssk6hysma.jpg
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Quote:
Originally Posted by
Nutsack
Hey Guys,
I'm looking for quotes for 50,100, & 150. Material is 6061 aluminum hex bar stock .750 across the flats
My drawing may complicate things more than it should, so if you have any questions, please ask. Basically it's knock .015 off the outside diameter, put the 2 hash marks - we were using a cutoff tool that was .093 wide, but something close in width will work. drill 2 bores and cross drill the holes.
My only concerns are that the pieces be centered enough so that the hex edges are taken off in (relatively) equal amounts. With the current ones, sometimes the cutter would hit much more on one side making a large "flat" corner and be barely hitting on the other side.
Secondly, The parts will be anodized so surface condition can't have deep dings or deep jaw marks that sand blasting wont take out.
We have several prototypes that we are looking to move into production with soon too, so we'd really like to form a relationship with a good shop who puts out quality product at a fair price.
Nut,
Very interested in quoting this and any of your other production work. We are a contract manufacturer in Nampa, ID, as well as a manufacturer of our own product lines, and we have the bandwidth to take care of these items and more like them.
Could you email contact information to [email protected] ?
Thank you!
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Sent you a private message
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
PM Sent
Thank you
Matt Schindler
Micro Shaped
Email: [email protected]
Phone: 309-282-6700
Website: www.microshaped.com
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Hey Nutsack,
Tried to tender a quote, your PMs are full. My email's at [email protected]. I'd love to have the opportunity to work on this.
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
I have a bar fed cnc lathe with live tooling and y axis that would be perfect for this part. I have zero work for this lathe right now.
[email protected]
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Hey Nut, i own a small machine shop in West Texas, i could machine these parts for you, and many other parts on our hardinge turret lathes.
please send contact infi for a quote: [email protected]
5 Attachment(s)
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Hello Nut
It is Andy ,nice to meet you .
1. our company provide Precision CNC Machining service
2. we can produce this aluminium parts for you , our price is :
12 USD/pcs based on 50 pcs
11 USD/pcs based on 100 pcs
10 USD/pcs based on 150 pcs
include air transport fee to your address and anodizing fee
3. in order to assure you that our quality is good ,we can offer a deferred payment ,30% prepayment ,pay 30% before shipment ,pay the balance after you receive parts and test .
4. please see attachment ,we produce these handguards (gun parts ) for our customer, the material is aluminium 6061,and anodized .
if interested ,please do not hesitate too contact me
-
Best regards ,
sales manager Supeng Machine Manufacturing Co., Ltd.
Andy.Xie
[email protected]
skype: andy.xie88
www.su-peng.com
Attachment 314956
Attachment 314958
Attachment 314960
Attachment 314962
Attachment 314964
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Quote:
Originally Posted by
aspeyrer
Wow, that's a 4 dollar part!, marked up to 12 dollars by a Chinese machine shop!
No kidding!
Re: Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
Hi Nut,
We are intrested to provide the quotation. Is this possible to contact us at this email address [email protected]
BR
/SL Wong
Sales Manager
Proto Tree LLC
Website: Proto Tree
Email: [email protected]
