Printable View
Hello , im looking for someone who can make these two molds i've made in solidworks.
I dont know what type of file you guys want so , send me a PM and i'll do the conversion asap and just in case the PM box fills this is my email : [email protected]
the dimensions of the mold are : 680 x 355 x 15 millimeters , and the second one : 718 x 355 x 15 millimeters
and they need to be shipped to Puerto Rico
thank you
Attachment 217664
Attachment 217666
What material? i mean what grade of Aluminum? and tolerances of machined parts etc
about aluminum , the one with the most corrosion resistant
and about tolerance , i dont know about that , i think it would be , 0.30mm , this molds are a prototype , depending how the part pulls out , ill be making adjustments , and ill require a new mold :)
Okay,
Is it possible for you to make it on MDF and check?... Just for cost saving..post the 3d model so that values (dimensions) may be extracted..we do not know the draft angle and Z-depth...
i can send you the .igs file if you want
the thing with mdf is that the mold was created to pull the outer part of the original , MDF cant be used for composites because in the curing process , it will expand , and lets not forget that i have to put some tooling gelcoat to the mdf , so i have to make the mold like .5 - 1mm bigger , for the tooling gelcoat
sometimes the main part is made out of MDF and we do the mold out of it , but since we got now SW , we just do it digitally
the RFQ is still open :)
Can you send all information and files to [email protected]
I would like to quote on this.
Thanks,
Mike
Email sent.
Thank you for your time.
RFQ is close