2 Attachment(s)
Plasma Table Build Log Including Free Plans Link, & Pictures by Weldtutor
Simple construction methods without elaborate machining techniques, as well as "user friendly" electronic control components, are features I attempted to incorporate into this project.
Thanks CNC Zone & to the many who have posted information, plans, answered questions as well as given opinions.
The table top was first squared, levelled, & tack welded on the shop floor.
Legs (2" square tube), casters, & leg spreaders (1" std. pipe) were added.
Welding of these components was then completed.
More to follow.
Weldtutor
4 Attachment(s)
Trevorhinze Machine Photos
Belt drive mechanism is shown in 1st photo.
Control box shown has an arc start relay at top left & linisteppers at top right.
Two power supplies, with a 12V unit at lower left.
Sample cuts. Eagle about 7" wide .250" thick.
Biker 15" wide 14 ga.