Originally Posted by
judleroy
Ok I think I got it tested right. There was one issue. I read 0v for the -12v. The 5v measured 5.14, 12v was 12.4v and 24v was 25.5v. I'm not sure if I tested the -12v correctly but if it is tested on the same settings as the rest then it is not present and reads -0.0v. Will this cause the machine not to startup? If the machine were started up and it went out would everything shutdown like what happens to me. If this may fix my issues I will try fixing it if not it's on to a retrofit. Any advice for moving forward would be yearly appreciated. Thanks for all the advice so far bloke and fasto.
Judleroy