Need Parameters and possibly EEPROMS
So I had a tech come and look at the machine. Its a 1989 Kitamura Mycenter 2 OMB. Said something in the Parameters was off, even thought I have the ORIGINAL papers from Kitamura. I have an OM-B control, 20 tool changer. I need to see if the ladder in the ROM is bad, or if the ROM chips (EO1 and EO2) are bad and need to be replaced. The machine turns on, goes into ready, but when I turn the TEACH/EDIT/MDI switch, nothing happens. Anyone have this machine and a set of parameters? Or anyone able to burn a set of ROMS and I can paypal you? I need this machine back up months ago!!! Nobody seems to know how to fix it.
Re: Need Parameters and possibly EEPROMS
Re: Need Parameters and possibly EEPROMS
Re: Need Parameters and possibly EEPROMS
I could help you. I have parameters , diagnostics and backup of OE1and OE2.
Re: Need Parameters and possibly EEPROMS
How can I get a hold of these from you hashemireza? I have the techs with the fanuc programmer coming out on Tuesday to try to modify my ladder again.
Re: Need Parameters and possibly EEPROMS
I have parameters and some diagnostics, but they retyped my ladder in type M, and I need it in type L.
Re: Need Parameters and possibly EEPROMS
Having a kitamura mycenter 2x 1997 with yasnac I80M controler i loste all paramaetres including offset,macro.common and aux2 data.
Anyone can help ill be soooooo thankful.