[sam5408]

Hey Guys!

I just started working at a new company and they want me to write some code for the Fanuc 16tt.

I was wondering if anyone had a manual for it?

Thanks!

[Heavy_Metal]

Hi,

When your lathe is a twin spindle with one or two turrets you need a lot off M- and G-codes specially for that machine.
These are not the codes you find in the Fanuc manuals.

I attached the Operator Manuals for Fanuc 16-18 TB and TC

Regards,
Heavy_Metal

[fordav11]

The Fanuc manuals only cover basic single turret machines. TT functions are almost always in the machine tool builder's manual.
If you need help with FAPT or twin turret programming just ask. I've been using twin turret machines and FAPT for many years.

[sam5408]

Thanks very much! I'll get to locating the Machine builder's guide! In the meanwhile thanks so much!

[Heavy_Metal]

Hi,

Can you telling us a bit more about your machine.
Are you new in the business or do you have experience with cnc programming.
Is it a machine with twin spindle, double turret, live tools, Y-axis, C- or B-axis ?

Regards,
Heavy_Metal.

[gp2020]

Hi,

When your lathe is a twin spindle with one or two turrets you need a lot off M- and G-codes specially for that machine.
These are not the codes you find in the Fanuc manuals.

I attached the Operator Manuals for Fanuc 16-18 TB and TC

Regards,
Heavy_Metal

where do I get the manual ? i cannot find it here , can you send me the manual on my email? [email protected]