381,936 Registered Members
Welcome to the CNC-Arena Forum
Results 1 to 4 of 4
  1. #1

    Join Date
    Feb 2014
    Posts
    2

    Mori Seiki MV35/40 Axis Interlocks

    Hi everyone,
    First post so go easy on me!

    So I just brought a Mv35/40 into my shop, bought it from a friend who got it at auction. (I know asking for trouble) any who I got it into place and am going through the troubleshooting portion. I'm stumped. I have cleared all alarms and seems that everything is OK (All drives have green lights, and nothing blaring red at me anymore). However when I try to home z (or any axis) the position on the screen changes but nothing physically moves. Then it alarms out with an over travel, does anyone have an idea what I can do to get the axis's to home out. I feel (and hope) I am just missing something simple. I looked at the parameters and really dont know what to change or exactly which controls the axis interlock or drives. I did flip the toggle for MLK. Any help would be greatly appreciated.

    Controller is a yasnac MX1

    12 hrs later and all I accomplished was getting the tool changer sequence back in order!

    Needless to say frustrated!

  2. #2

    Join Date
    Feb 2009
    Posts
    5116
    Mlk= machine lock, with that on, program will run and display positions will move, but axis won't. Is the switch on?

    Sent from my G-Tab Quantum using Tapatalk

  3. #3

    Join Date
    Feb 2014
    Posts
    2
    No I checked that, its a 3 position switch, Machine lock (MLK), OFF, and Screen Lock (SLK), I checked the I/O and the switch is working, plus I tried all three positions just in case.

    i am wondering if there is a parameter or something that locks the axis moving for transportation.

  4. #4

    Join Date
    Feb 2009
    Posts
    5116
    No transport parameter that I remember, but it is a yasnac, so who knows.

    Sent from my G-Tab Quantum using Tapatalk

Similar Threads

  1. mori seiki MV35 FANUC 11m 1986
    By zavateandu in forum Mori Seiki Mills
    Replies: 0
    Last Post: 03-29-2013, 09:23 AM
  2. Mori Seiki MV35/40 Fanuc 11M
    By fmaw44 in forum Mori Seiki Mills
    Replies: 3
    Last Post: 09-25-2012, 08:52 PM
  3. Mori Seiki MV35/35 MX1
    By jdeere4250 in forum Mori Seiki Mills
    Replies: 2
    Last Post: 04-30-2012, 07:03 AM
  4. Mori MV35/Fanuc 6M
    By SteveY in forum Mori Seiki Mills
    Replies: 5
    Last Post: 07-02-2010, 12:34 AM
  5. spindle belts for mori seiki mv35/40
    By brandou10l in forum General MetalWorking Machines
    Replies: 2
    Last Post: 01-06-2008, 12:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Advertising