584,861 active members*
4,843 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2013
    Posts
    6

    Mazak QT8N T32-2 Tool change position

    Hello...

    When i want to move to the tool change position, the machine want to move 101mm over the home position...

    What parameters change the Tool change Position?

    greetings from Germany,

    Peter

  2. #2
    Join Date
    Jan 2011
    Posts
    350

    Re: Mazak QT8N T32-2 Tool change position

    My guess would be to check your tool change macro program, assuming your machine has always had this problem.

  3. #3
    Join Date
    Mar 2013
    Posts
    6

    Re: Mazak QT8N T32-2 Tool change position

    where can i open it?

  4. #4
    Join Date
    Jan 2011
    Posts
    350

    Re: Mazak QT8N T32-2 Tool change position

    I think Mazak T32 is with Mitsubishi 300 controls, so there is an edit lock B (that's the data protect key that is on your operator panel) and edit lock C (param 39 of basic specifications is set to 0). Then you should be able to open your O9000-O9999 macro programs, usually O9001 is the one used for tool change.

  5. #5
    Join Date
    Jun 2012
    Posts
    36

    Re: Mazak QT8N T32-2 Tool change position

    Hello Friend,

    The tool change position is decided by the parameter P17 and you can set from 1 to 8 depending on your requirement and before doing any changes always note down the original value and do.Refer the parameter manual for description of each setting say 1------meaning,2-------------meaning.

    SHEKAR

  6. #6

    Re: Mazak QT8N T32-2 Tool change position

    So.. it fix or not?

Similar Threads

  1. How to change Tool change position(About MAZATROL T1 control)
    By liushuixingyun in forum Mazak, Mitsubishi, Mazatrol
    Replies: 6
    Last Post: 01-07-2014, 01:33 AM
  2. How do I change the Tool Change Position?
    By RussMachine in forum Tormach Personal CNC Mill
    Replies: 4
    Last Post: 01-04-2014, 08:08 PM
  3. Setting tool offsets and tool change position.
    By trishbits in forum CamBam
    Replies: 1
    Last Post: 02-08-2013, 12:18 AM
  4. MAZAK QT8N stopped with Alarm 039
    By ua6lfj in forum DNC Problems and Solutions
    Replies: 4
    Last Post: 10-09-2012, 01:49 AM
  5. tool change position on a mazak nexus mill 640m
    By Denis13 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 02-03-2008, 05:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •