The 100 latest posts at CNC-Arena

Hello unfortunately plane is not possible on this machine. I can only pivot working plane ABC. The 3D red is activated without kinematics...

Good morning and thank you a lot thumbs-up.gif That looks like a few very interesting stations.... Regards matthias

In general it’s common to influence the feed with the feed override. The turning speed override is responsible for the spindle turning spee...

Hello Nike If you need the program more often, then I would definitely write it over calculating the middle with Q parameters... the less f...

My suggestion would be Mori Seiki Regards Marco

Hello everybody I am working on a Hermle C42U with iTNC530 SP6. Now I have a work piece where I have to level 4 pre-existing dill holes with...

Thank you a lot... it worked!!!

and Biglia

Hello I don’t know ShopMill but with ShopTurn you can generally limit the rapid traverse in the program like this: -select upper progr...

Hello Bobis Have you tried if it works yet? I am curious... I don’t know your current axes configuration but if it’s no horizontal mill...

Hello I worked for a long time on a DMG milling machines with Fanuc controller. Now we have a new machine with Siemens 840D ShopMill. So ...

Have a look at Spinner and Emco....

Hello Do you undertake a first manual tool change or a 2nd Automatic tool change? The 2nd one is always configurated in the machine param...

Hi I am going to look at Takamaz I can also name Nakamura... Regards Guido

Hello I can think of Okuma Multus/macturn,Mazak Integrex and Doosan Kind regards Florian

Hello everybody As the Metav fair starts next week and I would like to inform myself about the topic turning- milling- centres, I have the ...

Hello With our DMG DMC835V and DMU 60 the machines also goes into a changing position.. I don’t think that you can change that. Maybe in th...

Hello On our machine (Korradi) the following happens: as soon a tool change takes place, the table goes right to the top, all the way to t...

Hello Thank you for the hint Always have too much work to do I will try it out.... the problem is that the base of the pocket needs to ...

Hello Bobis, Haven’t read you in a long time Try it like this: PLANE EULER EULPR+90 EULNU+78 EULROT+91 TURN If it doesn’t help an...

Hello Please I urgently need help.. Last time I adjusted a work piece on a machine with a manual swivel head BC and activated working plane...

Hello everybody I have the same problem so I would like to join in the conversation.. Controller: iTNC530 34049406_SP4 The named error me...

Hello we’ve been working for a while now with various depot’s Regards CAM alex

Hello I wanted to ask if anybody has ever used the “tool-depot” function. I wanted to try it out but it did not work as expected .....

Hello Work through Siemens CAST. NX ( and I mean work through!). Also the Cam express HTML file especially for NX CAM of the NX installation...

Thank you Speedy1 for your quick answer. I will try it out and report back.. The 31i has “OR” Regards

Or, like in my apprenticeship with a tool Tik-tak

I would suggest probing with the 3D sensor.. Just as an idea... (PS: the machine only des what you tell it to so... so hence you should kno...

Hello guys I would like to know how to set up the WS zero point on a Heidenhain-iTNC 530 controller.. The machine cannot see in which direc...

Hello frigot Just a question to begin with: On the 31i does a OR inquiry exists????? wow.gif My 21i doesn’t have it sad.gif But n...

Hello everybody I want that the machine does a warm up at 6 o’ clock automatically. However I have to focus the %. Does anybody have any...

It not possible to say what machine is best to use just by looking at the size of the parts that you want to process... there are so many d...

Hello everybody We would like expand our production into new areas. At the moment we mainly mill parts on 5-axis machines with minimal cla...

Hello Are all folders empty? Have a look under file type “all” if there are still other files in the folders.

Hello Then one can see what reaction time the machine has!!!! Is that correct???? Greetings

And what software are you looking for exactly? biggrin.gif Greetings

Hello! I am looking for a free software of Autodesk Inventor 12 for windows 7 professional (private usage) Can anybody help me out? Tha...

The measurements might be slightly bigger- I will know more details soon. As soon as I see the machine in person I can find out if it’s st...

Hello Andreas! Well for my taste the Y path is a bit short. When parts are longer then they often are wider as well. But 300mm is very s...

Hello I never thought about but you could try something out. Make an emergency stop under the circumstances that YOU want and have a look in ...

With a stop watch

Morning Hello how can I find out the time between confirming the emergency stop switch and the standstill of the X axis. Controller ITNC530...

This morning I wanted to tidy our new machines DMU 125/ Dmu 60 a little bit and wanted to delete a few folders. I got the following error me...

Hello I don’t fully understand your question but as I read it, you have to turn back a external recess. Are you doing it with convent?...

Hello I am going to look at a second hand CNC machine that I might want to add to my other machine. However it’s a custom-made product. ...

Hello! Try it with this: 0 BEGIN PGM RADIUSATCONTOUR MM 1 BLK FORM 0.1 Z X-50 Y-50 Z-20 2 BLK FORM 0.2 X+50 Y+50 Z+0 3 L Z+150 R0 F M...

Hello I have to apply a radius on many different parts with a torus mill. So similar to a hemisphere, but not until the middle but only mil...

With the demo at home I do it like this: Demo controller off, delete tool.t manually- Turn demo controller on, transfer new tool.t Re...

Hello community I have another question about the iTNC530: At work there are 13 machines working with a Heidenhain controller. About a ...

Hello I don’t think that exists readymade. However it’s possible to make the parts “adaptable” in SolidEdge (from ST4 i believe)...

Hello Do you often clean your keyboards with liquid cleaner? Does coolant splatter often gets onto the keyboard? These could be reasons fo...

You have to enter the lowest diameter that your chamfer really has, then it should work!

Are you sure that it’s the 0,1mm one???

Hello With the one that you define at the bottom!

Hello guys I have another problem again: I would like to post a chamfer cutter with compensation type controller. In order to do so I hav...

Hi How did you define your limitations? The problem should be related to the tolerances. Maybe you can post the STEP here? Regards M...

Thank you for the quick answers! Unfortunately I only have the HSM – I cannot access HSS. But how do you explain that the job is better ca...

Hello experts We have 2 Hermle C600 milling machines with Heidenhain controller. Now the keyboards on both machines are defect. Either t...

Me too... HSS between curves should work well... Over the sinews tolerance you can influence how “clear” the contours should look like....

Hi I would use a HSS model for this kind of process Regards

Hello everybody I have considerable difficulties to process a radius progression with a linear finishing job. When entering a XY oversize ...

Hello To 90% the screen @ cgTNC All Phillips controller apart from the Mill-plus have a CGA special timing. Regards mtronik

I guess it’s a colour screen- then I would say it’s the screen. What machine have you got? Maybe it has a standard VGA- connection whe...

Hello guys I have to program a recess with an outer diameter in MAZATROL. For that I have to pull back into the recess but the machine give...

Hello On my screen the green is gone. Can anybody tell me if that problem is related to the screen or the graphic card? Regards Patta

Hello If you mean the kinematics display from DCM and the kinematics with the number no.35: .... then you have to try it out for a long time...

Ok I forgot to mention that a file that was loaded in the editor cannot be deleted. So first close the editor or open another file in the edi...

Hello CNC Friends, the following machines are now offered on our online marketplace for used machinery (USED eMarket): Other turni...

hi!Martillo I am afraid you can't get the time value you want, because on my cnc machine with Sinumerik 840d no such timer exist...

Well the measuring system is blank. Error is still there... I got a hint from someone that the problem could be related to the power supply o...

hi! the RND if for Radius and CHF is to chamfer at 45 degrees.

Hello If that would be that easy then I would not post this question here. Regards Caddy

I can imagine that you will need about 200 form drills and that you need to expect about 30-40% material surcharge...

Hello everybody We have to process a moulded hole on 400 turned parts. Here are the details: Material 1.4305, through hole, smallest dril...

If that’s the only error message, then a emergency stop button is engaged. Otherwise it’s a consecutive fault that is triggered by other ...

Hello everybody I have installed a full version of the programmers workplace and now I want to simulate a boring machine. I have selected...

I would appreciate any kind of help! The error message “emergency stop 3000” exists since files were inserted. It stays even after switc...

I am urgently searching for the machine parameter for a NEF500 plus. After a battery defect the parameters are gone, no data backup and DMG d...

First of all you should check if the files are really empty ( in the program manager: cursor onto data INPUT) If the editor is empty, then...

Good morning On our Shopmill we have several programs that are stated with size 0. Recently an INI-file with size 0 always gets produced w...

Thank you a lot for your advice. However I can’t select individual cycles anymore. They are simply gone!

Schau: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewIt...em=250996070420 Gruß Frank500

Now at Ebay for 1,- Euro for Sale: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewIt...em=250996070420 Greetings Frank

The 810D doesn’t have the surfaces of the 840D- both are identical, the 810D merely has a different hardware—just for your information......

Here a short example so you can adopt the correct order.... FL X+0 Y+0 RL CLSD+ FL X+0 Y+45 FC DR- R10 CCX+10 CCY+45 FLT X+32 Y+8 FL Y+...

So in your first block 16, you should always have X and Y so that you machine knows where it is in the room. In your 18th block a CCX and CC...

Hi I am racking my brains at the moment but I guess after only 2 months iTNC its probably a bit too hard for me wink.gif I have programm...

Hello does anybody know what to do?? We have an old Siemens controller 810D with the surface of the 840D. After a failure of the NC many cy...

Hello I also had that problem with older Fanuc controllers. The solution was: instead of programming rapid traverse (in subprogram feed to...

Hello I just thought about something else... have a look in the service under MAINT PROBE if the radius is entered there. If not then that m...

Hello You do the whole thing in Work NC not in CAD. Well then you done everything correct, then your part always stays the same size in the ...

Hello I am new in Work NC- just finished my first trainings course. That’s why I don’t have much experience yet. My question: I ...

Ok, I ordered a new battery yesterday (KUHN) Then I hope the error message will be gone after. If it’s really the CPU then don’t have a c...

Hello Thank you for your answer but unfortunately that wasn’t the problem.

Hello the #05 is the emergency stop on the machine as a consequence of the error M01. Error M01 is a Checksum-error in the constant memory....

Are you working on a milling machine? I don’t know that at all... I mainly program incremental anyway but if you don’t want to move it ...

Hello CNC Friends, the following machines are now offered on our online marketplace for used machinery (USED eMarket): Machining c...

Hello I know setting/moving the zero point in the program with G10. e.g. G10 L2 P1 X.. Y.. Z.. C.. or incremental G10 L2 P1 U.. V.. W.. H...

Hello Check path C:\Fidia\WS\cca.dat.; in the CCA.dat you will find the minimum information. For example: 5 Origin 10mm C1x 10mm C1...