Hi Dears,
I have a problem. Very slow cutting sheet metal thicker than 6 millimeters. There is an error and I can not figure out piercing operation.
...
M98P9997
...
using this macro. I need an alternative to macro for piercing. Please help me. How to write a macro? Is it necessary to make changes in pmc-sb? "Beam on during approach" method, where can I find? is added to the machine I use? Thank you very much!
Working video:
Using macro's code:
Code:
N309 M98P9020
N310 M98P9003
N311 G90
N312 G68 R#509
N313 G32P2Q2
N314 G00X627.27Y214.87
N315 E001
N316 E101
N317 M98P9997
N318 G01X629.84Y213.67
N319 G03X629.83Y214.48I-1.19J0.38
N320 G01X629.76Y214.67
N321 G03X628.16Y215.42I-1.17J-0.43
N322 G01X626.92Y214.96
N323 G03X625.92Y214.6I-0.04J-1.45
N324 G01X624.68Y214.15
N325 G03X623.93Y212.55I0.43J-1.17
N326 G01X624.Y212.36
N327 G03X625.6Y211.61I1.18J0.43
N328 G01X626.85Y212.07
N329 G03X627.84Y212.43I0.03J1.44
N330 G01X629.08Y212.88
N331 G03X629.79Y213.53I-0.43J1.17
N332 G03X628.79Y213.99I-0.5J0.23
N333 M98P9998
N334 G00X611.Y194.93
N335 E003
N336 E102
N337 M98P9986
N338 G01X613.02Y192.91
N339 G03X603.58Y202.14I-4.78J4.56
N340 G03X612.91Y192.81I4.66J-4.67