[azerty002]

hey
how to bring up a G03 and G02in each row ?

Firt version

N140 G3 X-1.547 Y-0.074 R1.539
N150 X1.543 Y0.072 R1.547
N160 X-0.006 Y1.546 R1.547
N170 G1 X-0.005 Y5.296
N180 G3 X-5.293 Y-0.263 R5.289
N190 X5.289 Y0.261 R5.297
N200 X-0.005 Y5.296 R5.297
N210 G1 X-0.003 Y12.796

second version
N140 G3 X-1.547 Y-0.074 R1.539
N150 G3 X1.543 Y0.072 R1.547
N160 G3 X-0.006 Y1.546 R1.547
N170 G1 X-0.005 Y5.296
N180 G3 X-5.293 Y-0.263 R5.289
N190 G3 X5.289 Y0.261 R5.297
N200 G3 X-0.005 Y5.296 R5.297
N210 G1 X-0.003 Y12.796

this is my post processor
thanks for any help

[Bm150]

Here you go.
https://docs.google.com/file/d/0B2Ev...p=docslist_api

[azerty002]

Concerning G2 and G3 they works perfectly
but my friend the GO1 is messing , it just don't appear in any row ?

100 G0 Z50.005
N110 G21
N120 G0 G17 G40 G49 G80 G90
N130 T219 M6
N140 G0 G90 X-0.286 Y-1.076 S1909 M3
N150 Z50.000
N160 Z12.800
N170 Z7.800 F190.9
N180 Y-0.980 Z6.825
N190 Y-0.695 Z5.887
N200 Y-0.233 Z5.022
N210 Y0.389 Z4.264
N220 Y1.146 Z3.643
N230 Y2.011 Z3.181
N240 Y2.949 Z2.896
N250 Y3.924 Z2.800
N260 G2 X4.714 Y8.924 R5.000
N270 G2 X9.714 Y3.924 R5.000
N280 G2 X-0.286 Y-6.076 R10.000
N290 G2 X-10.286 Y3.924 R10.000
N300 G2 X-0.286 Y13.924 R10.000
N310 G2 X4.387 Y12.765 R10.000
N320 X5.107 Y12.345 Z2.756
N330 X5.790 Y11.866 Z2.713
N340 X6.431 Y11.332 Z2.669
N350 X7.025 Y10.747 Z2.625
N360 X7.568 Y10.114 Z2.582

[Bm150]

Ok bud. I will have a look sometime today.

[Bm150]

Ok seen the error of my ways, should be corrected if you download again using same link above.

[azerty002]

it works perfectly
i feel embarrassed to ask for a last help
i look to fix the feed rate ''F'' Value ( same old problem with writing X , Y and Z value )
thanks

[Bm150]

So you need the feed on every line?

[azerty002]

No ,but the feed is written wrong
exp : instead of writing F0.5 it is written F .5 and F 6 to F 6.

[Bm150]

Ok no problem. Give me 10 mins

[Bm150]

Ready for you to download again.

[azerty002]

always
you the best
thanks a lot