I have a HAAS SL-30 with a chip auger on it. We are having problems with the fine steel chips falling through the perforations in the sheetmetal for the coolant drainage rather than traveling out the auger chute with the bigger chips. Does anyone have a work around for this?
Thread: HAAS SL-30 Chip Auger Problem
Results 1 to 3 of 3
-
04-24-2014, 01:26 PM #1
Registered
- Join Date
- Dec 2013
- Posts
- 2
HAAS SL-30 Chip Auger Problem
-
04-25-2014, 12:20 AM #2
Member
- Join Date
- Mar 2010
- Posts
- 1852
Re: HAAS SL-30 Chip Auger Problem
That is perfectly normal. Not sure how you expect to keep fines out of the tray, but it is normal. You will need to clean the tray out once in a while. Either that or be very aggressive and make only BIG chips. There is no way to keep all chips out of the chip tray.
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28
-
04-25-2014, 11:42 AM #3
Registered
- Join Date
- Dec 2013
- Posts
- 2
Re: HAAS SL-30 Chip Auger Problem
I should have said that differently. I don't mean the "fines" what we are seeing is the standard "C or 9 shaped chip" getting through.
Reply With QuoteSimilar Threads
-
Looking for a chip auger for Haas VF2
By jstucken in forum Want To Buy...Need help!Replies: 0Last Post: 04-20-2012, 12:59 AM -
Haas Mini Mill Chip Auger
By Tolesh in forum Haas MillsReplies: 7Last Post: 11-12-2011, 12:36 AM -
Haas replacment part for chip auger
By Ziggy33 in forum Want To Buy...Need help!Replies: 3Last Post: 10-24-2011, 08:00 PM -
Chip Auger
By jstucken in forum Haas MillsReplies: 2Last Post: 08-04-2008, 09:40 PM -
Chip auger on my 1999 VM24 problem
By moldcore in forum MilltronicsReplies: 2Last Post: 05-20-2007, 06:25 PM
Tags for this Thread
Posting Permissions
