584,837 active members*
5,423 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2014
    Posts
    19

    Question gweike laser engraver lc1290 mirrors allign help

    i got a new laser, LC1290 from gweike with 100w RECI, and i had to dismantle the top parts, not the rails, to be able to get the monster in the office.
    now i have a biiiig problem aligning the mirrors. after many hours of forum reading, i think 3 mirrors are not on the same level.
    so, i'm coming with some questions and begging for some experts help and reply's
    1. is a must to center the beam on all 3 mirrors?
    2. how can i check if all mirrors are on the same level?
    3. is anyone have a tutorial to allign the mirrors from point of mounting, not just fine details?
    4. at a surface of 1200x900, the dot can be set to hit the same place, on all the table surface, or it's just a myth? i can do that for the left half of table, but not for the right
    thanks for reading and for possible answers

  2. #2
    Join Date
    Nov 2012
    Posts
    492

    Re: gweike laser engraver lc1290 mirrors allign help

    I think you could get better and faster help on Sawmillcreek in the engravers forum, lots of gweki owners there knowledgeable people

  3. #3

    Re: gweike laser engraver lc1290 mirrors allign help

    Hi Sanyyos
    here's a video may help you check if the Laser mean on level and align the laser beam:
    https://www.youtube.com/watch?v=pw8Ro2vEEzY
    hope you can solve the problem soon.
    www.thunderlaser.com

  4. #4
    Join Date
    Jan 2014
    Posts
    19

    Re: gweike laser engraver lc1290 mirrors allign help

    thx a lot for the tutorial.
    my problem is a little weird...
    I have the dot in the same place on 3 corners: up left and right, down left, and in the 4th corner, right down, near the control buttons, my beam is always hiting 3 mm down compared with the others

  5. #5

    Re: gweike laser engraver lc1290 mirrors allign help

    Hi sanyyos

    here is the video of the G.WEIKE machine aligned light path .
    http://www.wklaser.com/vid_59.aspx

    hope it is helpful.
    thanks
    Abby
    Abby
    [email protected] SKYPE:cyosusu http://www.wklaser.com/

Similar Threads

  1. wklaser (Gweike laser) 2011 No. 1 Hot Product--6040N laser engraver display
    By Melody-gweike in forum Laser Engraving / Cutting Machine General Topics
    Replies: 4
    Last Post: 08-05-2014, 02:25 PM
  2. 120W LC1290 GWeike laser cutter with some extras!
    By grossmanator in forum Laser Engraving / Cutting Machine General Topics
    Replies: 6
    Last Post: 09-28-2013, 02:46 AM
  3. GWEIKE RF engraver
    By gweike_laser in forum Laser Engraving / Cutting Machine General Topics
    Replies: 0
    Last Post: 09-08-2012, 01:59 AM
  4. wklaser(Gweike laser) new laser engraver display
    By tina in forum News Announcements
    Replies: 2
    Last Post: 09-22-2011, 12:20 AM
  5. Replies: 1
    Last Post: 09-07-2009, 04:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •