CAD/CAM Recruiters in Charlotte has MANY new cnc needs..:
Most provide full relocation.. The package generally vary email resume in word not PDF to:. bw@cadcamrecruiters(dotcom) since 1981
we are not on any networks or affiliation so resumes stays with us and confidential

* Mastercam millturns c axis/ y axis etc 80-95k East FLA Coast Need TOP Notch person.
* cnc setup hi speed packaging mastercam a plus but not critical state of the art facility, clean full relo(except closing costs) 35 an hr
* CNC Programmer from MOLDS environment FLA , NC, and MO
* CNC MFG engineer mastercam a plus Charleston DC large co
* CNC POSTS developer Charlotte position opens in June when person retires 80? 90s? not sure
* CNC application engineer Charlotte for the same co with Posts spot
* CREEP FEED Grinding engineer NC and another spot opens in FL (probably) in 3-5 weeks)
* GRINDING Upstate SC, MO, , Raleigh NC (creep feed not importnat on these 3)
* HI speed molds/ packaging machinist full relo 35 an hgr
* PRODUCT DEVELOPMENT ENGINEER- airfoils, turbines, blades and vanes etc to 100k! UGNX a plus CNC exposure big plus!
* CNC repair tech/maint tech 6 positions 1 is INHOUSE most in SE USA
* CNC repair tech in CT, 10% travel at best will only be at 2 plants in Hartford area. EDM a plus but mill/lathe OK
* BSME cnc MFG engineer (Charlotte, near Raleigh, Greensboro, GA) some companies are adament about degrees...so be it..
* POSTS Processing developer (CT, Minn, NC) and one can be located in their house anywhere One spot will go to 110k
* Tool designer- airfoils, blade and vanes, trubines etc.. SE USA great location
* MILL-TURN Machinist all shifts we must have 6 new positions just in last week (mro NT, okuma Multus etc RELO is provided SE USA
* CNC MANAGER Northern California not SF but up in Nice area south of Oregon, away from folks that think Nancy Pelosi is normal.
* surfcam Programmer central FL
* ESPRIT programmer/ NFG engineer NC and VA
* GRINDING application engineer One in midwest one in SE USA
* UGNX Mold designer/ NC programmer if no CNC thats ok but but must have design large well known CO
* Mastercam 5 axis MFG egineer (not setup) aerospace co 10k relo NE FL coast
* SWISS 2 new spots western NC, Atlanta burbs

* Delcam Powershape/ powermill large international co SE USA programming, sys, admim, plastics a plus
* mastercam Race team in NC 3 axis is enough.. 25-27 hr
* cnc manager/ working mgr/ programmer bobcad on the beach in Carolinas..need person he can leave alone and run shop


again resumes stays with US and do NOT go on any "networks"
Bill wright 704 541 1100 www.cadcamrceruiters.com email resume IN WORD NOT PDF to bw@cadcamrecruitersc(DOTKOM)