F-Tool International
Products
22
F-Tool International AG
Chucking systems
Blank CentroClamp 130x90x55 mm
FT 02183
The Blank CentroClamp can be used for centric clamping of cubic or rectangular blanks with maximum edge length of ca. L= 160 x W = 80 x H = 160 mm. The jaws can be adjusted in a grid of 5mm. The blanks are fixed firmly with several M8 studs. The compact design and the tapered jaws provide optimal access to the work piece from all sides. The Blank CentroClamp can be mounted on appropriate palettes from below using M8 screws.
The Blank CentroClamp from F-Tool is suitable for low-cost, robotised small and medium series production. The new F-Tool product combines compact design and flexible application possibilities at a favourable price.
The great advantage of the Blank CentroClamp lies primarily in its use on robotic systems that need constant re-feeding and require a large number of clamping tools for day and night shift operations.
F-Tool watch-maker wire tool set
|
Chucking system
F-Tool International AG
Chucking systems
FT 02150
F-Tool watch-maker wire tool set
The smaller the work pieces, the harder it is to clamp in a selected, aligned position.
The F-Tool watch maker wire tool set is the right support, when flat plates or subtle stamps have to be clamped fast and accurate in the EDM wire cutting machine.
ZeroPoint Clamping System (ZPS)
|
Chucking system
F-Tool International AG
Chucking systems
F-Tool ZPS
The F-Tool ZPS is a simple, precise, powerful zero point clamping system. The positioning takes place by means of conically cut clamping pins which compress the centring ring during clamping and form a friction-locked connection with the base unit. This compensates for any lateral clearance. The pallet can be fastened to the ZPS base unit mechanically using screws or by means of an additional independent clamping mechanism.
